Öland Cycling Boot
Öland Cycling Boot
Couldn't load pickup availability
Öland is the bike boot that's warm enough for winter rides and cool enough for everywhere else. It combines the performance of winter bike boots with the aesthetic of the boots you'd wear to the coffee shop. Rated for comfort from 20 to 45 degrees F (-7 to 7 degrees C), Öland lets you ride in comfort and transition to work, class, or the post-ride hangout without missing a step. Lace up for anything this winter with Öland.
- ECCO's full-grain waterproof leather upper is made with Bioscavenge and DriTan technology to save and recycle water during manufacturing. Leather Working Group-certified.
- Waterproof construction
- 100 g of Primaloft ® insulation
- Single-boot design for less bulk
- Real rubber outsole with anti-slip Microglass inserts
- Compatible with flat pedals or two-bolt cleats (cleat plate included)
- Reflective accents for improved visibility
- Rated for comfort from 20 to 45 degrees F (-7 to 7 degrees C)
Share







Öland Cycling Boot in action
Feature Highlights
-
Waterproof Construction
Waterproof construction keeps feet warm and dry both on and off the bike. The Öland is rated for comfort from 20 to 45 degrees F (-7 to 7 degrees C).
-
Rubber Outsole with Microglass Inserts
The microglass rubber compound electrostatically aligned with microscopic glass fibers to create abrasive protruding shards, increasing friction on slippery surfaces such as ice, wet wood, wet linoleum, and wet metal found on many stairs and floors.
-
2-Hole Mountain Sole
The Öland is compatible with clipless pedals with a two-bolt design, and also with flat pedals thanks to the included cleat plate.
Additional Info
Size Chart
Footwear Sizing Assistant
Items needed: pen or pencil, large sheet of paper, tape-measure in millimeters. Measure wearing socks that you will most often wear with these boots. You will be taking measurements of both feet!
Step 1: Place a sheet of paper flat on the floor. Sit on a chair and place one foot on the paper. Apply pressure to your foot and trace the shape of that foot on the paper, carefully holding the pen vertically and perpendicular to the paper, tracing the foot as closely as possible without angling the pen in or out.
Step 2: Using a tape-measure, measure the distance from the very bottom of the heel to the top of the longest toe, as illustrated in points A and B on the diagram. It is necessary to measure in three-digit millimeters (for example: 292mm)
Step 3: Measure the distance spanning the ball of the foot at its widest point, as illustrated in points C and D on the diagram, using two or three digit millimeter measurements depending on the size of your foot.
Step 4: Repeat the above steps for your other foot and compare the measurements. Find the longer of the two length measurements between your right and left feet, as well as the wider of the two width measurements.
Step 5: Use the longest length measurement and the widest width measurement in three-digit millimeters to reference the chart and find the appropriate size.

Size | Length | Width |
---|---|---|
36 | 210.00–226.00mm | 75.00–80.00mm |
37 | 226.00–233.00 | 77.50–82.50 |
38 | 233.00–239.00 | 83.00–89.50 |
39 | 239.00–241.00 | 85.00–91.00 |
40 | 241.00–246.50 | 86.00–93.00 |
41 | 246.50–254.00 | 86.50–95.00 |
42 | 254.00–261.00 | 88.00–96.00 |
43 | 261.00–269.00 | 90.00–98.00 |
44 | 269.00–275.00 | 93.00–99.00 |
45 | 275.00–283.00 | 93.00–103.00 |
46 | 283.00–289.00 | 95.00–108.00 |
47 | 289.00–295.50 | 96.00–112.50 |
48 | 295.50–301.00 | 98.00–117.50 |
50 | 301.00–316.00 | 102.00–122.50 |
Care Instructions
Spot clean. Avoid force-dried heat
Materials
Upper: 100% Leather; Lining: 100% Polyester Mesh; Outer Sole: Rubber